VERICUT Module: Grinder-Dressing - Simulate dressing where a secondary tool is applied to a grinding wheel to freshen the grinding surface, or to change the grinding wheel cutting shape. VERICUT simulates the dynamic compensation needed while the dresser is used, even while the grinder is engaged with the part.Reshape the grinding tool during simulation with Grinder-DressingAs the grinding wheel removes material on the part, it wears out. A dresser unit is periodically used to ensure the roundness of the grinding wheel and that the cutting shape is maintained. With the proper Dresser device it is possible to change the diameter of the grinding wheel or to create a new cross-section profile on the wheel. With the Grinder-Dressing module, this process can be reproduced in VERICUT.The Grinder-Dressing module offers superior G-Code simulation for all manufacturing industries. Simulating grinding operations with a dressed grinding wheel, allows users to check and verify all related processes on expensive parts and equipment.The Grinder-Dressing module supports Continuous Grinding, In-Process Grinding and Creep Feed Grinding. This means that the grinding wheel diameter constantly changes as the part is machined, keeping the grinding wheel in a state of specified sharpness.The VERICUT verification process accurately checks for errors on all 5-axis milling and turning processes no matter how complex the machining operation.As the grinding wheel size is reduced, the machine components get closer to the part, creating a high risk of collision. VERICUT checks the clearance between the machine components and the part to be machined for potential collisions.